Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Omega HH82: (1 year) CAL VER /5500
DATE:                  06-Jul-98
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.6 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       18
NUMBER OF LINES:       98
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Source:
#   Omega HH81 & HH82 Instruction Manual
#
# Compatibility:
#   5500/CAL 5.0 or MET/CAL 5.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        V
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: 30 min. - REQUIRED
  1.004  DISP         Temperature: 18 - 28 degC
  1.004  DISP         Humidity: <80%
  1.005  HEAD         INITIAL SETUP
  1.006  DISP         While pressing the HOLD key, press POWER
  1.006  DISP         to turn UUT on.  If Battery indicator illuminates,
  1.006  DISP         replace battery before proceeding.
  1.007  DISP         Remove the bottom cover and select K Type thermocouple.
  1.008  DISP         Connect the 5500A TC terminals to the CH A Input using
  1.008  DISP         K Type thermocouple wire and connectors.
  1.009  DISP         Press "A" on the front panel to select CH A input.
  1.009  DISP         Select AUTO range.
  1.009  DISP         Select degF.
  1.010  HEAD         {K TYPE}
  1.011  5500         -250.0degF     0.1% 1.3U                    _K TC    2W
  2.001  5500         32.0degF       0.1% 1.3U                    _K TC    2W
  3.001  5500         2000degF       0.2% 1.8U                    _K TC    2W
  4.001  DISP         Select degC mode.
  4.002  5500         -150.0degC     0.2% 1U                      _K TC    2W
  5.001  5500         0.0degC        0.1% 0.7U                    _K TC    2W
  6.001  5500         1370degC       0.2% 1U                      _K TC    2W
  7.001  HEAD         {J TYPE}
  7.002  DISP         Connect the 5500A TC terminals to the CH A Input using
  7.002  DISP         J Type thermocouple wire and connectors.
  7.003  DISP         On the HH82, select J Type thermocouple.
  7.004  5500         -270.0degF     0.1% 1.3U                    _J TC    2W
  8.001  5500         32.0degF       0.1% 1.3U                    _J TC    2W
  9.001  5500         1800degF       0.2% 1.8U                    _J TC    2W
 10.001  DISP         Select degC.
 10.002  5500         -160.0degC     0.2% 1U                      _J TC    2W
 11.001  5500         0.0degC        0.1% 0.7U                    _J TC    2W
 12.001  5500         990degC        0.2% 1U                      _J TC    2W
 13.001  HEAD         {HOLD FUNCTION}
 13.002  5500         -100.0degC                                  _J TC S  2W
 13.003  DISP         Press the HOLD key.
 13.004  5500         *                                                 S
 13.005  EVAL   Does the {HOLD display = ~ 0.0degC}?
 14.001  DISP         Press the HOLD key to take out of HOLD.
 14.002  TARGET
 14.003  HEAD         {REL FUNCTION}
 14.004  5500         -100.0degC                                  _J TC S  2W
 14.005  PORT         [D3000]
 14.006  DISP         Press the REL key.
 14.007  5500         100.0degC                                   _J TC S  2W
 14.008  EVAL   Does the {REL display = ~200degC}?
 15.001  HEAD         {MAX/MIN FUNCTION}
 15.002  DISP         Press the RCD (max min) key.
 15.003  5500         -100.0degC                                  _J TC S  2W
 15.004  PORT         [D3000]
 15.005  5500         100.0degC                                   _J TC S  2W
 15.006  DISP         Press the READ key.
 15.007  EVAL   Does the {READ display = ~100degC}?
 16.001  DISP         Press the READ key.
 16.002  EVAL   Does the {READ display = ~-100degC}?
 17.001  5500         *                                                 S
 17.002  HEAD         {B INPUT}
 17.003  DISP         Connect the 5500A TC terminals to the CH B Input using
 17.003  DISP         J Type thermocouple wire and connectors.
 17.004  DISP         Press "B" on the front panel to select CH B input.
 17.004  DISP         Select AUTO range.
 17.004  DISP         Select degC.
 17.005  5500         0.0degC        0.1% 0.7U                    _J TC    2W
 18.001  END